Bitumen Penetration Grade 50/70
Bitumen 50/70 Description
Bitumen Penetration Grade 50/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen is specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen 50/70 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 50/70 in the asphalt mixing plant.
Properties of Bitumen Penetration Grade 50/70
Penetration grade bitumen 50/70 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 50/70 has penetration between 50~70 desi-millimeter and the softening point between 46~ 54 C.
The PG bitumen 50/70 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumen is specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen penetration grade 50/70 is hard PG bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 50/70 Applications
The bitumen penetration grade 50/70 is a semi-hard penetration grade, with penetration between 50 and 70. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 50/70
HJ Oil guaranty the quality of bitumen PG 50/70 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 50/70 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 50/70 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Bitumen 50/70 Packing
Paving Bitumen 50/70 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Bitumen PG 50/70 Specifications
| Bitumen 50/70 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 50-70 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 46/54 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 295 Min |
| Penetration Index | EN 12591 | – | -1.5 +0.7 |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 230 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 50 Min |
| Increase in softening point | EN 1427 | °C | 11 Max |
Bitumen Penetration Grade 40/60
Description of Bitumen 40/60
Bitumen Penetration Grade 40/60 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Bitumen 40/60 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 40/60 in the asphalt mixing plant.
Properties of Bitumen Penetration Grade 40/60
Bitumen 40/60 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Bitumen 40/60 has penetration between 40~60 desi-millimeter and the softening point between 48~ 56 C.
The bitumen 40/60 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen 40/60 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Application of Bitumen Penetration Grade 40/60
The bitumen penetration grade 40/60 is a semi-hard penetration grade, with penetration between 40 and 60. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions, and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 40/60
HJ Oil guaranty the quality of bitumen penetration grade 40/60 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 40/60 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 40/60 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 40/60
Paving Bitumen 40/60 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen 40/60
| Bitumen 40/60 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 40-60 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 48/56 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 325 Min |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 230 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 50 Min |
| Increase in softening point | EN 1427 | °C | 11 Max |
Bitumen Penetration Grade 35/50
Bitumen 35/50 Description
Bitumen Penetration Grade 35/50 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen 35/50 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 35/50 in the asphalt mixing plant.
Properties of Bitumen Penetration Grade 35/50
Penetration grade bitumen 35/50 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 35/50 has penetration between 35~50 desi-millimeter and the softening point between 50~ 58 C.
The bitumen 35/50 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen 35/50 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 35/50 Application
The bitumen 35/50 is a semi-hard penetration grade, with penetration between 35 and 50. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions, and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 35/50
we guaranty the quality of bitumen penetration grade 35/50 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 35-50 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
we guarantees that the Bitumen Grade 35/50 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 35/50
Paving Bitumen 35/50 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen 35/50
| Bitumen 35/50 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 35-50 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 50/58 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 370 Min |
| Penetration Index | EN 12591 | – | -1.5 +0.7 |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 240 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 53 Min |
| Increase in softening point | EN 1427 | °C | 8 Max |
Bitumen Penetration Grade 30/45
Bitumen 30/45 Description
Bitumen Penetration Grade 30/45 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Properties of Bitumen Penetration Grade 30/45
Penetration grade bitumen 30/45 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 30/45 has penetration between 30~45 desi-millimeter and the softening point between 52~ 60 C.
The bitumen 30/45 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen penetration grade 30/45 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 30/45 Application
The bitumen 30/45 is a semi-hard penetration grade, with penetration between 30 and 45. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions, and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 30/45
HJ Oil guaranty the quality of bitumen 30/45 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 30-45 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 30/45 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 30/45
Paving Bitumen 30/45 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen Penetration Grade 30/45
| Bitumen 30/45 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 30-45 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 52/60 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 400 Min |
| Solubility | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 240 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 53 Min |
| Increase in softening point | EN 1427 | °C | 8 Max |
Bitumen Penetration Grade 20/30
Description of Bitumen 20/30
Bitumen Penetration Grade 20/30 is a standard Hard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Properties of Bitumen Penetration Grade 85/100
Penetration grade bitumen 20/30 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 20/30 has penetration between 20~30 desi-millimeter and the softening point between 55~63 C.
The penetration grade bitumen 20/30 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen penetration grade 20/30 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 20/30 Applications
Bitumen 20/30 is suitable for road construction and repair for the asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Guaranty and Safety of Bitumen Penetration 85/100
HJ OIL guarantees the quality of bitumen penetration grade 20/30 with the arrangement of the international inspectors to check the quality and quantity of the bitumen penetration grade 20-30 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 20/30 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 20/30
Paving Bitumen 20/30 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen Penetration Grade 20/30
| Bitumen 20/30 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 20-30 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 53/65 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 530 Min |
| Solubility | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 240 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 55 Min |
| Increase in softening point | EN 1427 | °C | 8 Max |
Bitumen Penetration grade 200/300
Bitumen Penetration grade 200/300 Description
Bitumen Penetration Grade 200/300 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ is produced from the vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen has a thermoplastic property that causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.
Bitumen Penetration grade 200/300 Applications
Bitumen 200/300 is suitable for road construction and for asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Guaranty and safety of bitumen 200/300
HJ Oil guarantees the quality of bitumen penetration grade 200/300 with the arrangement of the international inspectors to check quality and quantity during the loading to the vessel and controlling the production by QC by batch test report before shipping. HJ Oil guarantees the quality to meet with ASTM.
Packing of Bitumen 80/100
Paving Bitumen 80/100 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Bitumen Penetration grade 200/300 Specifications
| Bitumen 200/300 | Test method | Unit | Specification |
| Specific gravity @ 25°C | ASTM D70 | Kg/m3 | 990-1040 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 200/300 |
| Softening point °C | ASTM D36 | °C | 32 min |
| Ductility @25 °C | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 1 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 37 min |
| Flashpoint °C | ASTM D92 | °C | 177 min |
| Solubility in Trichloroethylene | ASTM D2042 | wt % | 99 min |
| Spot test | — | Negative |
Bitumen Penetration Grade 120/150
Bitumen Penetration grade 120/150 Description
Bitumen Penetration Grade 120/150 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen is produced from the vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.
Bitumen Penetration grade 120/150 Applications
Bitumen 120/150 is suitable for road construction and for asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Guaranty and safety of bitumen 120/150
HJ Oil guarantees the quality of bitumen penetration grade 120/150 with the arrangement of the international inspectors to check quality and quantity during the loading to the vessel and controlling the production by QC by batch test report before shipping. HJ Oil guarantees the quality to meet with ASTM.
Packing of Bitumen 80/100
Paving Bitumen 80/100 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Bitumen Penetration grade 120/150 Specifications
| Bitumen 120/150 | Test method | Unit | Specification |
| Specific gravity @ 25°C | ASTM D70 | Kg/m3 | 1000-1050 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 120/150 |
| Softening point °C | ASTM D36 | °C | 38 min |
| Ductility @25 °C | ASTM D113 | Cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.5 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flashpoint °C | ASTM D92 | °C | 218 min |
| Solubility in Trichloroethylene | ASTM D2042 | wt % | 99 min |
| Spot test | — | Negative |
Bitumen Penetration Grade 85/100
Bitumen Penetration Grade 85/100 Description
Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced through aeration on the vacuum bottom (the raw material used for making bitumen left in the vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100.
Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi-hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it’s a basic material for all other bituminous products.
Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Bitumen grade 85/100 Applications
Bitumen 85/100 is suitable for road construction and for asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses and the main usage of this product is used in the spaying and chip application. The bitumen is provided during the presses of oxidation of vacuum bottom in bitumen production units. Due to its relatively low air blowing and penetration, It is used in areas with cold weather for asphalting and insulation. It is not cracked in low temperatures.
Guaranty and safety of bitumen 85/100
HJ Oil guaranty the quality of bitumen penetration grade 85/100 with the arrangement of the international inspectors to check the quality and quantity of the bitumen penetration grade 85/100 during the loading to the vessel and controlling the production by QC by batch test report before shipping. Tavoil guarantees the quality to meet with ASTM.
Packing of Bitumen 80/100
Paving Bitumen 80/100 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Bitumen Penetration Grade 85/100 Specifications
| Bitumen 85/100 | Test method | Unit | Specification |
| Specific gravity @ 25°c | ASTM D70 | Kg/cm3 | 1.01/1.06 |
| Penetration @ 25°c | ASTM D5 | mm/10 | 85/100 |
| Softening point °c | ASTM D36 | °C | 41/49 |
| Ductility @25 °c | ASTM D113 | Cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flash point c | ASTM D92 | °C | 250 min |
| Solubility is CS2(wt) % | ASTM D4 | wt % | 99.5 min |
| Spot test | A.A.S.H.O.T102 | Negative |
Bitumen Penetration Grade 80/100
Bitumen Penetration Grade 80/100 Description
Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. Bitumen supplied is produced from the vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 80/100 is semi-hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 80/100 is one of the most used bitumen grades and it’s a basic material for all other bituminous products.
Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Bitumen Penetration Grade 80/100 Applications
Bitumen 80/100 is suitable for road construction and for asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Guaranty and safety of bitumen 80/100
We guarantee the quality of bitumen penetration grade 80/100 with the arrangement of the international inspectors to check quality and quantity during the loading to the vessel and controlling the production by QC by batch test report before shipping. HJ Oil guarantees the quality to meet with ASTM.
Packing of Bitumen 80/100
Paving Bitumen 80/100 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Bitumen Penetration Grade 80/100 Specifications
| Bitumen 80/100 | Test method | Unit | Specification |
| Specific gravity @ 25°c | ASTM D70 | Kg/cm3 | 1.01/1.06 |
| Penetration @ 25°c | ASTM D5 | mm/10 | 80/100 |
| Softening point °c | ASTM D36 | °C | 42/50 |
| Ductility @25 °c | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flash point °c | ASTM D92 | °C | 250 min |
| Solubility is CS2(wt) % | ASTM D4 | wt % | 99.5 min |
| Spot test | A.A.S.H.O.T102 | Negative |
Bitumen Penetration Grade 60/70
Bitumen Penetration Grade 60/70 Description
Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by HJ Oil is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen Penetration Grade 60/70 is semi-hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 60/70 is one of the most used bitumen grades and it’s a basic material for all other bituminous products.
Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Bitumen Penetration Grade 60/70 Applications
Bitumen 60/70 is suitable for road construction and for the asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses and the main usage of this product is used in the road in mild regions. The bitumen is provided during the presses of oxidation of vacuum bottom in bitumen production units. Due to its medium air blowing and penetration, it is used in mild areas.
Guaranty and safety of bitumen 60/70
We guaranty the quality of bitumen penetration grade 60/70 with the arrangement of the international inspectors to check quality and quantity during the loading to the vessel and controlling the production by QC by batch test report before shipping. We guaranty the quality to meet with ASTM.
Bitumen Penetration Grade 60/70 Specifications
| Bitumen 60/70 | Test method | Unit | Specification |
| Specific gravity @ 25°C | ASTM D70 | Kg/cm3 | 1.01/1.06 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 60/70 |
| Softening point °C | ASTM D36 | °C | 49/56 |
| Ductility @25 °C | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flashpoint °C | ASTM D92 | °C | 232 min |
| Solubility in Trichloroethylene | ASTM D2042 | wt % | 99 min |
| Spot test | A.A.S.H.O.T102 | Negative |
Packing of Bitumen 60/70
Paving Bitumen 30/40 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, 1MT and 500Kg Jumbo Bags, or 300kg Bitubag.
