Description of Base Oil SN350
Base Oil SN350 For lubrication oil which is considered as a basis and after adding additives to the final lubricant called based oil.
In terms of volume of lubricant base oil is one of the most important components in the lubricant base oil formulation, on average, 95% up. Some groups, such as hydraulic and compressor lubricant, chemical additives and only 1% base oil makes up 99% combined.
Other lubricants like metal working fluids, lubricants and gear oils contain additives may be up to 30%. base oil can be obtained from oil or non-oil sources.
Mineral base oils are intended for the most commercial lubricants production. They are produced from the vacuum distillates and residual components using the traditional refining methods (selective treatment, dewaxing, further deresination for the residual components).
Base oil is produced by means of refining crude oil. This means that the crude oil is heated in order that various distillates can be separated from one another. During the heating process, light and heavy hydrocarbons are separated – the light ones can be refined to make petrol and other fuels, while the heavier ones are suitable for bitumen and base oils.
Uses
Base oil SN350 serves as a base stock for several industrial lubricants
- General-purpose oils
- Mould oil
- Transmission fluids
- Gear Oils
- Metalworking fluids
- Additives
- Hydraulic Oils
- Transformer Oils
Base Oil SN350 Packing
packed in new or used 210 kg drums, iso tank, flexibags, and IBC tank. Each 20-foot container takes 80 drums.
Handling health & Safety
Lubricants consisting of highly refined mineral oils with specification additives. In normal conditions of use, this lubricant presents no particular toxic hazard. All lubricants, of any kind should be handled with great care, particularly avoiding can contact with the skin.
Prevent any splashing, and keep away from combustible materials. Store undercover and away from any risk of pollution. Dispose of the used oil correctly; don’t pour down drains, into watercourses or the soil.
Specification of Base Oil SN350
| SPECIFICATION | MIN | MAX | METHOD |
| Viscosity @100˚C | 7.5 | 9 | ASTM D-445 |
| Viscosity @40˚C | 67 | 70 | ASTM D-445 |
| Viscosity Index | 90 | 100 | ASTM D-2270 |
| Flash Point ˚C | 220 | 230 | ASTM D-92 |
| Pour point | 0 | 0 | ASTM D-97 |
| Total Acid Number mgKOH/g | 0 | 0.03 | ASTM D-664 |
| Color | 2 | 2.5 | ASTM D-1500 |
| Density | 0.880 | 0.882 | ASTM D-1298 |