Bitumen Price
Bitumen Price August, 2022
Bitumen price on August 2022
The tension between Taiwan and China and the approach of the cold season in Europe are likely to increase the price of fuel carriers.
Therefore, it is not far from expected that the price of bitumen will rise due to this chaotic market as well as the political developments in the Middle East, East Asia and Eastern Europe.
In July, bitumen paste in the market of Taiwan, Singapore, and South Korea did not decrease much, instead, in the Middle East, especially in Iran, the price of bitumen decreased due to the nuclear negotiations and the high price of the dollar.
But due to the fact that we have entered the month of August and there has been no change in the prices of bitumen in East Asia, it is likely that the prices of bitumen in the Middle East, especially in Iran, will rise from tomorrow, August 9.
Bitumen Drum price expecting to reach 410$/MT minimum to 430$/MT and jumbo bag 395$/MT to 400 again.
These price are temporary and depend on competition of exporter it may increase up to 20% as well.
Bitumen Prices are affected by market demand and seasonal peak consumption.
The fluctuation of bitumen price is also due to issues such as:
Geopolitical tensions.
Shipping regulations.
Rising Oil price.
Economic condition of the world.
Road construction projects in different countries.
The cost of shipping and containers.
The high season.
Also, If you need other bitumen prices such as Bitumen VG 30 or VG 10 price or cutback bitumen price or emulsion bitumen price or PG grade Bitumen price or oxidized bitumen price please contact us for the latest bitumen price. We will try our best to satisfy our customers regarding the quality and price as well as delivery time.
We as the experienced and well-known Bitumen Supplier in the Middle East can operate and deliver any types of Bitumen with the best Bitumen Price and different types of Bitumen Packing and other Petrochemical products based on FOB, CFR, CPT, EXW, and CIF terms. As our commitment, we provide all necessary export documents required by International Banks and customs at the Discharge Port.
The continued rally in crude values helped to lift bitumen prices across much of Europe and Asia-Pacific, while tight supply and firmer demand also helped to boost the market.
Domestic and cross-border truck export prices rose sharply in key northwest and central European markets, driven by the recent surge in crude and fuel oil prices, as well as by tighter refinery supply.
Construction activity was still slow in many markets in northern and central Europe, but rates of project work were steadily rising after the winter lull. In the Mediterranean Greek and Spanish cargo premiums to high-sulphur fuel oil (HSFO) were assessed slightly higher, while Italian values remained steady. In domestic markets, outright prices jumped, supported by rallying crude and HSFO.
Despite global trends of oil price which has experienced a sharp decrease in the early hours of today, vacuum bottom price has reached the highest price of its history to almost ( approximately 380 $) which leads to higher bitumen price.
Although the US dollar exchange rate has gone up during the last week, the effect of VB’s rising price will impact the final price of bitumen.
Hence, it seems we will witness higher prices in the following days. Unless Bandar Abbas’s refinery increases VB production after the overhaul operations that due to the new rules of the domestic market (bartering bitumen) seems unlikely.
All in all, this situation has made it too difficult to make new deals in different shapes including bulk, drum, or jumbo bags with other countries except India these days.
The continued rally in crude values helped to lift bitumen prices across much of Europe and Asia-Pacific, while tight supply and firmer demand also helped to boost the market.
Domestic and cross-border truck export prices rose sharply in key northwest and central European markets, driven by the recent surge in crude and fuel oil prices, as well as by tighter refinery supply.
Construction activity was still slow in many markets in northern and central Europe, but rates of project work were steadily rising after the winter lull.
In the Mediterranean Greek and Spanish cargo premiums to high-sulphur fuel oil (HSFO) were assessed slightly higher, while Italian values remained steady. In domestic markets, outright prices jumped, supported by rallying crude and HSFO.
The Asia-Pacific bitumen market continued to be sup- ported by limited availability. Prices in Singapore touched the highest in 20 months, with discussions last seen above $420/t fob levels in August, 2022.
Production cuts and reduced supply from key Singapore and Malaysia-based producers, coupled with ongoing turnarounds in South Korea continued to reduce supply and support bitumen prices.
South Africa domestic prices jumped, after monthly revi- sions, taking export prices to southern African markets up in parallel with them.
Asia – Pacific And Middle east Market Commentary
We Are big Bitumen , petroleum & petrochemical supplier in Taiwan Vietnam & East Asia.
Exporterr Able To Offer The Best Bitumen Price From, Taiwan ,Singapoure , Malaysia , Vietnam ,Thailand , Philippines ,China.
- Taiwan Bitumen Price
- Vietnam Bitumen Price
- Myanmar Bitumen price
- Thailand Bitumen Price
- Philippines Bitumen Price
- Australian Bitumen Price
To Buy Bitumen and Get Today Last Updated Price Contact To:
Miss Wendy: +886-975212381
E-mail:
info@hjoil.com.tw
info@hjoilgroup.com
Bitumen Price list 60/70 MC30 PMB SS1 115/15 FOB Value on Since March 5, 2021
Bitumen Price increasing Same as other Commodities and Expecting to reach to 380$USD
Bitumen 40/50 Price
Bitumen 60/70 Price
Bitumen 80/100 Price
Bitumen C170 Price
Bitumen Price
Bitumen Penetration Grade 160/220 Description
Bitumen Penetration Grade 160/220 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Penetration Bitumen 160/150 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 160/150 in the asphalt mixing plant.
Properties of Bitumen 160/220
Penetration grade bitumen 160/220 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. bitumen 160/220 has penetration between 160~220 desi-millimeter and the softening point between 35~ 43C.
Penetration Grade Bitumen 160/220 is produced from the vacuum distillation of crude oil and is classified according to its penetration range. Bitumen 160/220 is a thermoplastic material that softens gradually as it is heated and hardens as it is cooled. This unique temperature/viscosity relationship is important when determining its performance parameters and application temperatures. Unlike modified binders, penetration grade bitumen acts as a Newtonian fluid at high in-service temperatures, which allows one to establish a temperature/viscosity relationship.
Application of Penetration Grade Bitumen 160/220
The bitumen 160/220 is a penetration grade, with penetration between 160 and 220. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
160/220 Penetration Grade Bitumen is used in the construction of single seals, double seals, and Cape seals, either as a tack coat or penetration spray. It is also used as the base bitumen for the manufacture of the majority of emulsions and polymer modified binders.
Also Paving Grade Bitumen 160/220 produced by HJ Oil provides very high performance in terms of resistance to aging, plasticity, and behavior at low temperatures. Thanks to those properties it’s employed to produce bituminous mixes constituting flexible structure for the paving of roadways, runways, pavement, track race, and landing platform.
• It has high-performance even in industrial sectors preparation of mixes for the production of membranes with SBS technology.
• The product is also applicable in the formulation process of bituminous emulsions, waterproofing membranes, oxidized bitumen, bituminous paints, special lubricants, and mastics.
Guaranty and Safety of Penetration Grade Bitumen 160/220
HJ Oil guaranty the quality of bitumen penetration grade 160/220 with the arrangement of the international inspectors to check the quality and quantity of the penetration grade bitumen 100/150 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 160/220 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 160/220
Paving Bitumen 160/220 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Penetration Bitumen 160/220
| Bitumen 160/220 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 100-150 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 35/43 |
| Kenematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 135 |
| Solubility in Xylene | EN 12592 | % | 99Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 220 Min |
| PERFORMANCE AFTER RTFOT METHOD TEST TO EN 12607-1 | | | |
| Change in mass (m/m) | EN12607-1 | % | 1 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 37 Min |
| Increase in Softening Point (R&B) | EN 1427 | °C | 37 Min |
| Softening Point after Hardening | EN 1427 | °C | 12 Max |
Description of Bitumen Penetration Grade 100/150
Bitumen Penetration Grade 100/150 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Bitumen 100/150 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 100/150 in the asphalt mixing plant.
Properties of Bitumen 100/150
Penetration grade bitumen 100/150 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. bitumen 100/150 has penetration between 100~150 desi-millimeter and the softening point between 39~ 47 C.
Penetration Grade Bitumen 100/150 is produced from the vacuum distillation of crude oil and is classified according to its penetration range. Bitumen 100/150 is a thermoplastic material that softens gradually as it is heated and hardens as it is cooled. This unique temperature/viscosity relationship is important when determining its performance parameters and application temperatures. Unlike modified binders, penetration grade bitumen acts as a Newtonian fluid at high in-service temperatures, which allows one to establish a temperature/viscosity relationship.
Application of Penetration Grade Bitumen 100/150
The bitumen 100/150 is a penetration grade, with penetration between 100 and 150. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
100/150 Penetration Grade Bitumen is used in the construction of single seals, double seals, and Cape seals, either as a tack coat or penetration spray. It is also used as the base bitumen for the manufacture of the majority of emulsions and polymer modified binders.
Also Paving Grade Bitumen 100/150 produced by HJ Oil provides very high performance in terms of resistance to aging, plasticity, and behavior at low temperatures. Thanks to those properties it’s employed to produce bituminous mixes constituting flexible structure for the paving of roadways, runways, pavement, track race, and landing platform.
• It has high-performance even in industrial sectors preparation of mixes for the production of membranes with SBS technology.
• The product is also applicable in the formulation process of bituminous emulsions, waterproofing membranes, oxidated bitumens, bituminous paints, special lubricants, and mastics.
Guaranty and Safety of Penetration Grade Bitumen 100/150
HJ Oil guaranty the quality of bitumen penetration grade 100/150 with the arrangement of the international inspectors to check the quality and quantity of the penetration grade bitumen 100/150 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 100/150 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 100/150
Paving Bitumen 100/150 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Penetration Bitumen 100/150
| Bitumen 100/150 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 100-150 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 39/47 |
| Kenematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 175 |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 230 Min |
| Resistance to hardening at 163°C: | | | |
| Change in mass (m/m) | EN12607-1 | % | 0.8 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 43 Min |
| Increase in softening point | EN 1427 | °C | 10 Max |
Bitumen 70/100 Description
Bitumen Penetration Grade 70/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Bitumen 70/100 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 70/100 in the asphalt mixing plant.
Properties of Bitumen 70/100
Penetration grade bitumen 70/100 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. bitumen 70/100 has penetration between 70~100 desi-millimeter and the softening point between 42~ 52 C.
The penetration bitumen 70/100 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen 70/100 is penetration bitumen using as paving bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Application of Penetration Grade Bitumen 70/100
The bitumen 70/100 is a semi-hard penetration grade, with penetration between 70 and 100. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
Also 70/100 Penetration Grade Bitumen is used in the construction of single seals, double seals, and Cape seals, either as a tack coat or penetration spray. It is also used as the base bitumen for the manufacture of the majority of emulsions and polymer modified binders.
PAVING GRADE BITUMEN 70⁄100 satisfies the requirements of fatigue resistance and provides very high performance in terms of plasticity and behavior at low temperatures.
The optimum viscosity in the range of temperatures for mixing and laying guarantees easy workability of the products, even for high-stress conditions.
PAVING GRADE BITUMEN 70⁄100 is used to produce bituminous mixes constituting a flexible structure for the paving of roadways, runways, pavement, track race, and landing platform.
Guaranty and Safety of Penetration Grade Bitumen 70/100
HJ Oil guaranty the quality of bitumen penetration grade 70/100 with the arrangement of the international inspectors to check the quality and quantity of the penetration grade bitumen 70/100 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 70/100 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Bitumen 70/100 Packing
Paving Bitumen 70/100 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Penetration Bitumen 70/100
| Bitumen 70/100 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 70-100 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 42/52 |
| Dynamic Viscosity @ 135⁰C | EN 12595 | Pa/s | 0.15-0.4 |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 225 Min |
| Resistance to hardening RTFOT: | | | |
| Change in mass (m/m) | EN12607-1 | % | 0.8 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 46 Min |
| Increase in softening point | EN 1427 | °C | 9 Max |
Bitumen 50/70 Description
Bitumen Penetration Grade 50/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen is specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen 50/70 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 50/70 in the asphalt mixing plant.
Properties of Bitumen Penetration Grade 50/70
Penetration grade bitumen 50/70 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 50/70 has penetration between 50~70 desi-millimeter and the softening point between 46~ 54 C.
The PG bitumen 50/70 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumen is specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen penetration grade 50/70 is hard PG bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 50/70 Applications
The bitumen penetration grade 50/70 is a semi-hard penetration grade, with penetration between 50 and 70. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 50/70
HJ Oil guaranty the quality of bitumen PG 50/70 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 50/70 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 50/70 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Bitumen 50/70 Packing
Paving Bitumen 50/70 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Bitumen PG 50/70 Specifications
| Bitumen 50/70 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 50-70 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 46/54 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 295 Min |
| Penetration Index | EN 12591 | – | -1.5 +0.7 |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 230 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 50 Min |
| Increase in softening point | EN 1427 | °C | 11 Max |
Description of Bitumen 40/60
Bitumen Penetration Grade 40/60 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Bitumen 40/60 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 40/60 in the asphalt mixing plant.
Properties of Bitumen Penetration Grade 40/60
Bitumen 40/60 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Bitumen 40/60 has penetration between 40~60 desi-millimeter and the softening point between 48~ 56 C.
The bitumen 40/60 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen 40/60 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Application of Bitumen Penetration Grade 40/60
The bitumen penetration grade 40/60 is a semi-hard penetration grade, with penetration between 40 and 60. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions, and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 40/60
HJ Oil guaranty the quality of bitumen penetration grade 40/60 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 40/60 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 40/60 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 40/60
Paving Bitumen 40/60 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen 40/60
| Bitumen 40/60 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 40-60 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 48/56 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 325 Min |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 230 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 50 Min |
| Increase in softening point | EN 1427 | °C | 11 Max |
Bitumen 35/50 Description
Bitumen Penetration Grade 35/50 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen 35/50 is manufactured with selected crude oils inefficient production processes that are undertaken in accordance with quality management standards EN ISO 9001. The consistently high quality is based on the meticulous selection of raw material and careful processing.
Constant quality control and additional comprehensive tests ensure the unproblematic use of Bitumen 35/50 in the asphalt mixing plant.
Properties of Bitumen Penetration Grade 35/50
Penetration grade bitumen 35/50 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 35/50 has penetration between 35~50 desi-millimeter and the softening point between 50~ 58 C.
The bitumen 35/50 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen 35/50 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 35/50 Application
The bitumen 35/50 is a semi-hard penetration grade, with penetration between 35 and 50. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions, and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 35/50
we guaranty the quality of bitumen penetration grade 35/50 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 35-50 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
we guarantees that the Bitumen Grade 35/50 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 35/50
Paving Bitumen 35/50 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen 35/50
| Bitumen 35/50 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 35-50 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 50/58 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 370 Min |
| Penetration Index | EN 12591 | – | -1.5 +0.7 |
| Solubility in Xylene | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 240 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 53 Min |
| Increase in softening point | EN 1427 | °C | 8 Max |
Bitumen 30/45 Description
Bitumen Penetration Grade 30/45 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ Oil is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Properties of Bitumen Penetration Grade 30/45
Penetration grade bitumen 30/45 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 30/45 has penetration between 30~45 desi-millimeter and the softening point between 52~ 60 C.
The bitumen 30/45 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen penetration grade 30/45 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 30/45 Application
The bitumen 30/45 is a semi-hard penetration grade, with penetration between 30 and 45. Which is mostly used in road construction, asphalt pavement, and manufacturer of hot-mix asphalt.
The penetration bituminous asphalt with high penetration numbers which are soft, mostly used in cold weather conditions, and hard bituminous asphalt (low penetration number) can be used for warm weather conditions.
Guaranty and Safety of Bitumen Penetration 30/45
HJ Oil guaranty the quality of bitumen 30/45 with the arrangement of the international inspectors to check the quality and quantity of the bitumen 30-45 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 30/45 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 30/45
Paving Bitumen 30/45 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen Penetration Grade 30/45
| Bitumen 30/45 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 30-45 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 52/60 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 400 Min |
| Solubility | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 240 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 53 Min |
| Increase in softening point | EN 1427 | °C | 8 Max |
Description of Bitumen 20/30
Bitumen Penetration Grade 20/30 is a standard Hard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumen are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Properties of Bitumen Penetration Grade 85/100
Penetration grade bitumen 20/30 supplied by HJ Oil is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by HJ Oil is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 20/30 has penetration between 20~30 desi-millimeter and the softening point between 55~63 C.
The penetration grade bitumen 20/30 has a thermoplastic property which is like synthetic resin material which gets softer with heating and hardens when cooled. Penetration grade bitumens are specified by the penetration and softening point test. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining.
Bitumen penetration grade 20/30 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specifications.
Bitumen Penetration Grade 20/30 Applications
Bitumen 20/30 is suitable for road construction and repair for the asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Guaranty and Safety of Bitumen Penetration 85/100
HJ OIL guarantees the quality of bitumen penetration grade 20/30 with the arrangement of the international inspectors to check the quality and quantity of the bitumen penetration grade 20-30 during the loading to the vessel and controlling the production by QC by batch test report before shipping.
HJ Oil guarantees that the Bitumen Grade 20/30 is produced in compliance and conformity to International of European Standard DIN EN 12591:99, also meets the requirements of the following specification.
Packing of Bitumen 20/30
Paving Bitumen 20/30 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Likewise, the rest of the grades are ready to load Ex-work bulk by truck.
Specification of Bitumen Penetration Grade 20/30
| Bitumen 20/30 | Test method | Unit | Specification |
| Penetration – 25°C, 100g, 5s | EN 1426 | mm | 20-30 |
| Softening Point (Ring & Ball) | EN 1427 | °C | 53/65 |
| Kinematic Viscosity @ 135⁰C | EN 12595 | mm²/s | 530 Min |
| Solubility | EN 12592 | % | 99 Min |
| Flashpoint (Cleveland Open) | EN 22592 | °C | 240 Min |
| Recistance to Hardening at 163 °C | |||
| Change in mass (m/m) | EN12607-1 | % | 0.5 Max |
| Retained Penetration 25°C, 100g, 5s (% of original) | EN 1426 | % | 55 Min |
| Increase in softening point | EN 1427 | °C | 8 Max |
Bitumen Penetration grade 200/300 Description
Bitumen Penetration Grade 200/300 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by HJ Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by HJ is produced from the vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumen has a thermoplastic property that causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability, and application temperatures of bitumen.
Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.
Bitumen Penetration grade 200/300 Applications
Bitumen 200/300 is suitable for road construction and for asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Guaranty and safety of bitumen 200/300
HJ Oil guarantees the quality of bitumen penetration grade 200/300 with the arrangement of the international inspectors to check quality and quantity during the loading to the vessel and controlling the production by QC by batch test report before shipping. HJ Oil guarantees the quality to meet with ASTM.
Packing of Bitumen 80/100
Paving Bitumen 80/100 is commonly packed in new steel drums, 150, 180 & 220 Kg barrels, and 1MT and 500Kg Jumbo Bags or 300kg Bitubag.
Bitumen Penetration grade 200/300 Specifications
| Bitumen 200/300 | Test method | Unit | Specification |
| Specific gravity @ 25°C | ASTM D70 | Kg/m3 | 990-1040 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 200/300 |
| Softening point °C | ASTM D36 | °C | 32 min |
| Ductility @25 °C | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 1 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 37 min |
| Flashpoint °C | ASTM D92 | °C | 177 min |
| Solubility in Trichloroethylene | ASTM D2042 | wt % | 99 min |
| Spot test | — | Negative |