Bitumen C170

Bitumen C170 Description

Bitumen C170 is a paving grade bitumen manufactured to AS 2008 Table 2.2 and is suitable for standard sealing and lightly trafficked Asphalt applications.

Bitumen C170 Applications

C170 bitumen can be used for all standard spray sealing and lightly trafficked asphalt applications.

Asphalt recommendations

Mixing Temperature	Holding time at Mixing Temperature	Medium term storage temperature	Medium term storage time	Maximum safe handling temperature
140-165°C	14 days	130-150°C	30 days	175°C

Sealing Recommendations

Spraying Temperature	Holding time at spraying temperature	Medium term storage temperature	Medium term storage time	Minimum pavement temperature
170-180°C	7 days	130-150°C	30 days	15°C

During sealing operations, it is normal practice to add cutter oil to the bitumen to reduce binder viscosity to a level at which effective wetting and adhesion of the cover aggregate can take place. The quantity of cutter oil added to the bitumen depends upon the pavement temperature, the daily traffic, and the nominal size of the cover aggregate. Basic cutting practice for Viva Bitumen C170 bitumen should be as follows:

Parts cutter per 100 parts bitumen measured at 15°C

Pavement Temperature (°C)	Traffic (veh/lane/day)	Nominal Aggregate Size: 10mm or greater	Nominal Aggregate Size: 7mm or less
15 to 20	low (<100) med (100 – 1500) high (>1500)	7-8 5-6 4	7-10 6-8 5-6
20 to 25	low med high	7-8 5-6 4	7-10 6-8 5-6
26 to 35	low med high	4-6 2-4 2-3	6-8 5-7 4-6
>36	all	0-2	0-3

Health & safety

HJ OIL Bitumen C170 is unlikely to present any significant health or safety hazard when properly used in the recommended application where good standards of industrial practice are maintained. Further guidance on Product Health and Safety is available on the relevant Material Safety Data Sheet.

Typical characteristics

Description	Units	Methods	Typical
Viscosity at 60° C	Pa.s	AS 2341.2	170
Viscosity at 135° C	Pa.s	AS 2341.2	0.35
Pen at 25° C	dmm	AS 2341.12	min 62
Flashpoint	° C	AS 2341.14	min 250
Viscosity of residue at 60° C (% of original)	Pa.s	AS 2341.2	max 300

Bitumen Classification

Bitumen Classification

Bitumen classification is according to viscosity (degree of fluidity) gradings. The higher the grade, the stiffer the bitumen. Most high performing roads in Australia are built and maintained using bitumen because it is durable and has exceptional waterproofing and adhesive properties. Bitumens used in road construction and maintenance are refined and blended to meet strict road engineering requirements and industry specifications.

Paving Grade Bitumen Class 170

Class 170 bitumen is widely used in sprayed sealing and light asphalt applications to provide durability and fatigue resistance. It is also used to manufacture cutback bitumens, bitumen emulsions, and modified bitumens.

Paving Grade Bitumen Class 240

Class 240 bitumen is for use in sprayed sealing applications where the local road agency has a preference for a slightly more viscous bitumen than Class 170.

Paving Grade Bitumen Class 320

Class 320 bitumen is most commonly used to manufacture asphalt mixes. Due to its higher viscosity, stiffer asphalt mixes can be produced to improve resistance to shoving and other problems associated with higher temperatures and traffic loads.

Paving Grade Bitumen Class 450

Class 450 bitumen is for use in the manufacture of asphalt mixes where the local road agency has a preference for a slightly more viscous bitumen than Class 320.

Bitumen Class 600

Class 600 bitumen is primarily used to manufacture extra heavy-duty asphalt pavements that need to endure substantial traffic loadings.

Applications

The table below shows typical applications for paving grade bitumens:

Application Temperature Recommendations

Type	C170	C240	C320	C450	C600
Asphalt Mixing	150 – 160°C	155 – 165°C	155 – 165°C	160 – 170°C	165 – 175°C
Asphalt Compaction	135 – 150°C	140 – 155°C	140 – 155°C	145 – 160°C	150 – 165°C
Sprayed Sealing	175 – 185°C	180 – 190°C	180 – 190°C	N/A	N/A

Typical Characteristics

Type	C170	C240	C320	C450	C600
Viscosity at 60°C, Pa.s	170	240	320	450	600
Viscosity at 135°C, Pa.s	0.4	0.45	0.53	0.66	0.8
Viscosity at 60°C, after RTFO, Pa.s	300	470	640	920	1300
Penetration at 25°C, dmm	70	58	46	36	27
Flashpoint, 60°C	360	360	360	360	360
Viscosity of residue at 60°C, % of original	180	190	200	205	215
Density at 15°C, kg/m3	1.04	1.04	1.04	1.04	1.04

Storage & Handling

The storage of bitumens for prolonged periods at elevated temperatures should be avoided as quality may be adversely affected. As a general rule, bitumen should be stored at the lowest temperature that enables practical use. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C to 40°C above the minimum pumping temperature are recommended.

Health & Safety

To ensure hot bitumen is used safely and efficiently the following safety precautions must be followed:
– Wear suitable personal protective equipment (PPE) at all times. Full skin protection is required to avoid accidental burns when transferring or handling hot bitumen.
– Always prevent contact between water and hot bitumen by checking the contents of the previous load before loading bituminous products into tankers and by following procedures to avoid violent boil-over of tanks.
– Avoid exposure to fumes by standing back on the gantry or upwind until the vapors have dispersed.
– Minimize bitumen fume by heating bitumen and asphalt products to the recommended temperatures.
– Minimize the use of diesel when cleaning equipment as this contributes to the bitumen fume.