SBS Modified Bitumen Roll Sheet

SBS Modified Bituminous Membrane Sheet Description

SBS Modified Bitumen Roll Sheet is made using SBS (Best Bitumen Modifier) polymer-modified bitumen and polyester film in rolls of 1 mm wide and 4 mm thickness. The dimensions of each roll are 10 square Meters.
The combination of bitumen modified with SBS polymer and tear-resistant polyester film has made waterproofing unique and has unique properties that make it completely distinct from similar products, including Characteristics are the ability to withstand cold and excellent flexibility in cold, mechanical properties and remarkable tensile strength, excellent adhesion to a variety of building materials and a very important self-repairing property. waterproofing is the best option for insulating sensitive and important structures.
Bitumen Roll sheet is available on a variety of finishes in silica powder, mineral aggregate, aluminum foil, and polyethylene film on request.

SBS Modified Bitumen Roll Sheet Characteristics

Distilled bitumen modified with a high percentage of SBS elastomeric polymers that ensure excellent properties of adherence, elasticity, and extreme flexibility at low temperatures. Due to the chemical properties of thermo-plastic rubber, the membrane should be protected against direct sunlight which triggers a process of early aging.

SBS Modified Applications

Exceptional performance in applications requiring above average resistance to repeated thermal-mechanical action. Metal, prefabricated flat, curved or saw tooth roofs subject to cyclic movements or considerable dimensional variations. Also widely used in underground tanking to waterproof basements and foundations, especially in areas with high humidity in the ground or close to the sea.

Advantages of SBS Modified Bitumen Roll Sheet

1. Compatibility with all types of flat roofing applications, but can also be used to waterproof car park decks, bridge decks, green roofs, etc.
2. Resistance to the most extreme weather conditions such as high and low temperatures, rain, snow, ice, and the freeze-thaw process.
3. The life expectancy of the SBS bitumen membrane is remarkable, even after aging it retains its pliability and elasticity, making it the ideal flat roof solution.
4. Dimensional stability is provided by the high-quality SBS bitumen blend together with a high-performance reinforcement, enabling the waterproofing system to accommodate building movement.
5. Installation is simple and can be achieved through a variety of methods; torch-applied, mechanically fixed, or adhered, depending on the specification and suitability.
6. Security and peace of mind for the building owner is achieved through the installation of a robust, multilayer, built up felt SBS modified bituminous waterproofing system.
7. High resistance to mechanical damage and puncturing in comparison to alternative flat roof coverings. Extreme resistance variants are available depending on the traffic requirements of the surface.
8. Excellent adhesion to the substrate on a flat roof installation (demonstrated by peel testing)
9. Quality control is increased when installing factory produced rolls of SBS modified bitumen.
10. In most cases, when a bituminous flat roof system reaches the end of its service life, a single layer overlay can be installed over the top of the existing system to extend and renew the longevity of the waterproofing system.

Guarantee

Bitumen Roll Sheet Guaranteed by more than 25 years in the field, excellent aging properties, extensive thermal operating range (-20/+100), versatile and reliable at any latitude, fast and easy to apply even on structures with complex shapes.

SBS Modified Membranes Specifications

APP Modified Bitumen Roll Sheet

APP Modified Bitumen Roll Sheet Description

APP Modified Bitumen Roll Sheet is a plastic bitumen blend, which is modified using plastic in the form of atactic polypropylene (APP). As installers begin to torch-apply APP, this type of plastic begins to melt at a point of 300F, where it melts into a liquid wax-like substance that acts as an almost free-flowing liquid which can then be mopped across a surface. APP has a high-temperature tolerance when heating, so is more user-friendly for installers.
This ease of melting makes APP bitumen popular on smaller roofs such as residential properties and commercial flat roofs.

The main advantages of our APP membranes

• Enhanced bitumen performance by increasing UV resistance
• Increasing flexibility at low temps
• Improving flow resistance at high temps
• Excellent weathering
• Fire resistant properties
• Climate adaptability
• Applicable on all sloping surfaces: on flat, vertical and curved surfaces.
• Excellent product for all weather conditions.
• Lightweight: prevents any excessive weight on the roof or the building structure.
• Good resistance to fatigue and tear.
• Longer lasting product (up to fifteen years)

General Data

• Nominal Roll Length: 10m
• Nominal Roll Width: 1m
• Nominal Thickness: 2-5 mm

Outstanding Features of APP Modified Bitumen Membrane

• Applicable on all sloping surfaces: on flat, vertical and curved surfaces.
• Excellent product for all weather conditions.
• Lightweight: prevents any excessive weight on the roof or the building structure.
• Good resistance to fatigue and tear.
• Longer lasting product (up to fifteen years)

Application Fields of APP Modified Bitumen Membrane

Tavoil APP Modified bitumen roll sheet may be used for a wide range of waterproofing applications including roofs, terraces, reservoirs,  basement walls, tunnels and car parks.

APP Modified Membrane Characteristics

Bitumen Coating

Bitumen Coating

Bitumen coating compositions having substantially improved application and drying properties and producing coatings of improved properties including resistance to ultraviolet rays and alligatoring resulting therefrom said coating compositions comprising volatile solvent solutions of a bitumen coating material having softening point between 110 F To 250 F. The bitumen coating are also characteristically non-viscous materials which are not thixotropic and are therefore ordinarily applied as thin films. The bitumen coating compositions may also contain filler materials which tend to settle from the non-thixotropic compositions after storage for only a short time. It has been proposed in the past to add inert colloidal fillers such as silica to obtain thixotropic properties and thicker films on the application of the compositions. However, even such inert fillers tend to affect only solution properties and generally exist in the finished coating as an expensive additive that does not benefit other properties of the coating.

Bitumen Pipe Coating

Bitumen pipe coat can be used both externally and internally on carbon steel pipes. It is usually black, and when applied properly, this coating offers outstanding cathodic protection needed for almost all structural steel pipes situated underground. It is regarded as one of the least expensive ways to provide cathodic protection to pipes. It is also the least complex coating process, making it suitable for casing pipes like in road bore.

Bitumen Paint

Asphalt paint is produced with asphalt as the main material and gasoline as the solvent and through the processes of material selection, dissolving, and sealing in the container. It is in a flowing or semi-flowing state and has a high viscosity and good durability, and its use needs no fire melting. The said asphalt paint is used in sealing roofing, sandwiched layer, etc. In various building engineering.

Bitumen Adhesive, Bitumen Glue

Bituminous adhesive glue is used in cold gluing of construction material in particular for its watertight properties. The known glue is thixotropic, which means that it becomes fluid when shaken, stirred, or otherwise agitated and sets again to a gel when allowed to stand. The thixotropic properties of the known glue are obtained by the presence of both the polymerized oil in combination with the ethyl-vinyl-acetate copolymer resin (EVA) and the non-polymerized oil in combination with oil-absorbing fillers. The use of the combination of these compounds has the advantage that it provides the thixotropic properties without having to use some organic solvents.

Bitumen Felt

An asphalt felt belongs to the field of the building materials. The utility model is characterized in that a solid bitumen thin layer is attached on one surface of the asphalt felt; when the utility model is used, the liquefied bitumen can be first brushed on the top of the storied building using a brush and then one surface of the asphalt felt which the solid bitumen thin layer is attached on the top of the storied building, and the solid bitumen thin layer is syncretized with the liquefied bitumen on the top of the storied building by using a burner to deliver heat with resulting in that the asphalt felt is uniformly covered without causing waste, thus not only enhancing the effect of preventing the seepage of the rainwater but also correspondingly reducing the workload due to that the amount of the used bitumen is reduced. The utility model has a reasonable design and can be used conveniently.

Bitumen Tape

The bitumen tape of the invention is suitable for sanitary and building applications for sealing against water and in vehicles for sealing or for sound insulation especially for the construction or repair of roofs, covering joints, or for the tight connection between masonry or concrete and installing parts like the window frame or sheet metal. The width of the bitumen tape preferably from 24 to 105 mm.

Bitumen Sheet

The bitumen sheet material is transported to a construction or use site, and the sheet material is cut to the desired lengths. The releasable casting film material is removed to expose the tackified surface, and the tacky surface then placed, i.e. Pressed, against the masonry or other surfaces it is designed to protect, and held in place by the tacky nature of the exposed surface of the bitumen layer.

Bitumen Joint Sealer

Bitumen joint sealer dispersion as the sealant to male and/or female sections, even. Of the water and assembly of the joint under sufficient axial pressure to force out some of the sealants on both inside and outside of the joint. Used for sealing of drinking and wastewater pipes, telephone conduits, expansion joints, cracks in masonry, etc. Good adhesion to pipe surfaces of all types is obtd. No displacement of adhesive during assembly of joint occurs, and there is no deformation or embrittlement during long periods of use. Efficient sealing over large contact areas is also obtd.

Bitumen Sealant

Bitumen sealant is a single component, neutral curing, high modulus, fast curing speed. And good adhesive capacity on many base material, having excellent weather ability, And resistance to the bitumen sealant can be applied in any season and easy to apply. There is high bonding strength, non-corrosive, have a strong seal with the majority of Construction materials.

Bitumen Crack Sealer

Crack sealer is deep enough, a grout material, such as a mortar or cement, is used to assist in filling these cracks. In these instances, the grout material is placed in the crack and allowed to harden. Thereafter, the asphalt sealer is placed in the crack over top of the grout material to completely fill the crack and level out the paved surface. This can also create durability issues in that existing grout fillers that are used in crack repair applications often have significant shrinkage issues. Thus, while an asphalt sealer used to help fill a crack may initially be level with the surface being repaired when the grout material shrinks, the asphalt sealer will drop into the crack as the level of the grout material recedes. The asphalt sealer thus is no longer flush with the upper paved surface and often falls into the crack itself.

Bitumen Metal Surface

Bitumen metal surface coat, preparation of the surface is of great importance and will influence the degree of adhesion obtained along with the life of the coating. All surfaces must be sound, stable, and thoroughly cleaned. Anti-corrosive bitumen may be applied on slightly damp but not wet surfaces. For excellent results apply on the dry surface only.